Legislation Details

File #: 2026-23258   
Type: New Business Status: Agenda Ready
File created: 6/4/2026 Meeting Body Development Review Committee
On agenda: 6/8/2026 Final action:
Title: Oak Shores Estates - Master Plan 000673 - Waiver to Master Plan in Review Parcel #: 9064-0000-02 # WaiverPIR-000838-2026 Tillman & Associates Engineering, LLC 6.12.9. H - Subdivision roads CODE states Dead end roads shall not exceed 1,500 feet and shall have a cul-de-sac at the terminal end. Refer to details in Section 7.3.1. Dead end roads intended to provide future access to adjacent unplatted areas may be permitted without a cul-de-sac provided that no lots front thereon, the length does not exceed 1,500 feet, and appropriate temporary end-of-road markers are provided. APPLICANT Request a waiver to use the alternative provided. Dead end road without cul-de-sac. A hammerhead with dead end segments less than 150' in length have been provided as an alternative turn around. 6.12.2.A - Right-of-way CODE states Right-of-way shall be platted or dedicated, meeting the minimum right-of-way width established in Table 6.12-1, to provide for the necessary access and other needed infrastru...
Sponsors: Board of County Commissioners
Attachments: 1. 6.7 Oak Shores Estates - Master Plan 000673 - Waiver to Master Plan in Review 000838.pdf

 

SUBJECT:

Title

Oak Shores Estates - Master Plan 000673 - Waiver to Master Plan in Review

Parcel #: 9064-0000-02     # WaiverPIR-000838-2026

Tillman & Associates Engineering, LLC

 

6.12.9. H - Subdivision roads

CODE states Dead end roads shall not exceed 1,500 feet and shall have a cul-de-sac at the terminal end. Refer to details in Section 7.3.1. Dead end roads intended to provide future access to adjacent unplatted areas may be permitted without a cul-de-sac provided that no lots front thereon, the length does not exceed 1,500 feet, and appropriate temporary end-of-road markers are provided.

APPLICANT Request a waiver to use the alternative provided. Dead end road without cul-de-sac. A hammerhead with dead end segments less than 150' in length have been provided as an alternative turn around.

 

6.12.2.A - Right-of-way

CODE states Right-of-way shall be platted or dedicated, meeting the minimum right-of-way width established in Table 6.12-1, to provide for the necessary access and other needed infrastructure.

improvements supporting the proposed development. Right-of-way can be provided by easement if approved by DRC.

APPLICANT Request a waiver as roadways will remain private & ROW width will be 40 feet wide with a 10 feet drainage and utility easement for a total width of 60 feet.

Body

end